How to Set-up a gameport,gamepad or joystick in paldo

From Paldo

Jump to: navigation, search

If you want gameport,gamepad or joystick to work in paldo you need to follow this procedure

Contents

[edit] Basics of Game Port,Gamepad and Joystick

[edit] Game Port

The game port is the traditional connector for video game input devices on an x86-based PCs. The game port is usually integrated with a PC I/O or sound card, either ISA or PCI, or as an on-board feature of some motherboards. The game port is no longer supported by Windows Vista and will thus likely largely disappear.

[edit] Gamepad

A gamepad, also called joypad or control pad, is a type of game controller held in the hand, where the digits (especially thumbs) are used to provide input. Gamepads generally feature a set of action buttons handled with the right thumb and a direction controller handled with the left. The direction controller has traditionally been a four-way digital cross (D-pad), but most modern controllers additionally (or as a substitute) feature an analog stick. The analog stick was introduced with the Atari 5200 controller, but did not reach popularity until the Nintendo 64, Sony PlayStation, and Sega Saturn.

[edit] Joystick

A joystick is a personal computer peripheral or general control device consisting of a handheld stick that pivots about one end and transmits its angle in two or three dimensions to a computer. Most joysticks are two-dimensional, having two axes of movement (similar to a mouse), but three-dimensional joysticks do exist. A joystick is generally configured so that moving the stick left or right signals movement along the X axis, and moving it forward (up) or back (down) signals movement along the Y axis. In joysticks that are configured for three-dimensional movement, twisting the stick left (counter-clockwise) or right (clockwise) signals movement along the Z axis. These three axes - X Y and Z - are, in relation to an aircraft, roll, pitch, and yaw.

[edit] Now we will see how to configure some Game Port,Gamepad,Joystick modules in paldo

First, we need to check if the gameport module is already loaded.

In a terminal, type the following command

 lsmod

It should display a list of the currently loaded modules.

One of the lines should begin with 'gameport'

 gameport 17160 2 snd_es1938

If you didn't find any similar line, look for the way to enable the gameport for your specific sound card in the list below.

Now, we need to setup the gamepad/joystick.Again in a terminal, type the following

 sudo modprobe joydev

Testing and calibrating the gamepad/joystick

If you want to check if everything's working correctly or/and you want to callibrate your device, you can try out jscalibrator.

[edit] What is jscalibrator?

GTK Joystick Calibrator With jscalibrator you can calibrate your joystick for Linux games. The Joystick Wrapper library (libjsw) is designed to provide a uniform API and user configuration for joysticks and other game controllers on all platforms.

It features an integrated library level calibration system using jscalibrator to provide a one time calibration for any program that uses libjsw. libjsw also features several levels of advanced joystick input error correction.

Image:5666.png

Install jscalibrator in paldo

   sudo upkg-install libjsw

If you want to use this program run the following command from your terminal

  jscalibrator

A new window should appear which should allow you to test and calibrate your device.

With followed cmd you can find the names of the jswdemos you can also use to test your gamecontroller:

  ls /usr/bin/jsw*

[edit] List of gameports, gamepads/joysticks and their corresponding commands

[edit] Gameports

Classic ISA/PnP gameports

 sudo modprobe ns558

Crystal SoundFusion gameports

 sudo modprobe cs461x

Aureal Vortex and Trident 4DWave gameports

 sudo modprobe pcigame

SoundBlaster Live! gameports

 sudo modprobe emu10k1-gp

Any other gameports(If your sound card isn't one of the above and you couldn't find it in lsmod, try this command)

 sudo modprobe gameport

[edit] Gamepads and joysticks

Analog joysticks and gamepads (Most gamepads and joysticks, especially generic ones, work well with this one)

 sudo modprobe analog

Assassin 3D and MadCatz Panther devices

  sudo modprobe a3d

Logitech ADI digital joysticks and gamepads

 sudo modprobe adi

Creative Labs Blaster Cobra gamepad

  sudo modprobe cobra

Genius Flight2000 Digital joysticks and gamepads

 sudo modprobe gf2k

Gravis GrIP joysticks and gamepads

 sudo modprobe grip

InterAct digital joysticks and gamepads

 sudo modprobe interact

ThrustMaster DirectConnect joysticks and gamepads

 sudo modprobe tmdc

Microsoft SideWinder digital joysticks and gamepads

 sudo modprobe sidewinder

Microsoft xbox controller then the command is

 sudo modprobe xpad

then do jscalibrator

Personal tools